Riding Guidelines

As part of Cycling UK we know we get great benefits from our cycling, but we know we nee to be responsible on the road. Our riding guidelines are based on three principles:

  • safety for all the riders in the group
  • enjoyment of the ride
  • minimising inconvenience to other road users

Our riders have a mix of experience, some with many years of group riding and others who are relatively new. These guidelines are a reminder to the former as well as a guide to the newcomers.

It is always for the individual rider to take responsibility for their actions. Regardless of the advice below, you should use your own judgment as to what is best for your own and the group’s safety in any situation. Also abide by the Highway Code and the Countryside Code.

  • Be alert to other riders in the group are doing.
  • Use the calls “car back” and “car front” to warn the group of approaching vehicles. Pass calls up and down the line.
  • Warn riders behind of potholes and hazards both verbally and by pointing, whenever it is safe to do so.
  • Do not stop suddenly, but do shout “slowing” or “stopping” before braking.
  • When we stop to regroup, do not stop near a junction or blind bend, and keep the road clear. (If a ride splits, a single person should mark a junction from a safe position, not the whole group).
  • When moving to single file the outside rider should drop back. Do not overtake the rider ahead on the inside.
  • Do not ride more than two abreast and keep in single file where appropriate.
  • If you do ride ahead, wait at the next junction or at the top/bottom of a hill.
  • Do not leave the group without informing either the ride Leader or the Sweeper.

With more people on a ride, we will often split into smaller groups to allow better communication and easier overtaking for other road users. On busier roads, we ride in groups of six or fewer, with at least 50 metres between groups to allow buses and HGVs to overtake more easily. Don’t ride in the gap between groups.

Riders in each group should aim to keep reasonably close. This is good for aerodynamics, communication, and other road users. We’re not aiming to ride inches apart like a pro-peloton, but not with bike-sized gaps that make it difficult to talk or overtake us.
If a group is longer than an articulated lorry – it’s too long!

When to ride two abreast and when to ‘single out’ can be a difficult decision – listen for the ride or group leader’s calls. In general, ride two abreast when there is room to pass safely (with 1.5m clearance or near enough) – this reduces the length of the group, making overtaking easier for drivers. Single out on narrower roads where this is not possible.
Sometimes overtaking by following vehicles may not be safely possible, the ride or group leader should be aware of this, and may signal the group to pause in a passing place, gateway or similar.
This is consistent with Highway Code Rule 66.

E-Bike Policy

Cycling UK Oxfordshire welcome e-bike riders to their rides, however insurance and practical riding requirements mean we must insist on the following policy.

  1. Riders are responsible for checking and disclosing to the Group whether their E-bike is legal to EAPC regulations.
  2. When attending a Group ride all e-bike riders must tell the Ride Leader if they are using an E-bike and confirm that it complies with the current E-Bike rules and laws (currently the EAPC regulations, see the DfT website).
  3. E-bike riders are responsible for ensuring they have sufficient range and physical ability to complete the ride at the pace of the group. They must be sufficiently independent to look after themselves if leaving the group during a ride.